Difference between revisions of "Video cable"
Jump to navigation
Jump to search
Jhynjhiruu (talk | contribs) |
|||
Line 1: | Line 1: | ||
== Video Cable Pinout == | == Video Cable Pinout == | ||
− | [[File:Pinout. | + | [[File:Pinout.jpg]] |
S-video is available on the port. The controller uses the same common N64 controller pinout, so you can plug in a real N64 controller but you need to power it from an external source. | S-video is available on the port. The controller uses the same common N64 controller pinout, so you can plug in a real N64 controller but you need to power it from an external source. |
Revision as of 02:47, 1 April 2018
Video Cable Pinout
S-video is available on the port. The controller uses the same common N64 controller pinout, so you can plug in a real N64 controller but you need to power it from an external source.
Pin N. | Description |
---|---|
1 | Controller # 3 input |
2 | Y (S-Video) |
3 | GND (Video) |
4 | GND (Audio) |
5 | Audio L |
6 | GND |
7 | Batt Data ?? |
8 | Power input + |
9 | Power input + |
10 | Power input - |
11 | Power input - |
12 | Batt data ?? |
13 | GND (Audio) |
14 | Audio R |
15 | Video Composite |
16 | C (S-Video) |
17 | Controller # 2 input |
18 | Controller # 4 input |
S-Video Signal
The multiplayer box is passing-through the S-video signal, but unfortunately the cable that goes between the iQue and that box does not pass the S-Video signal, so to use the multiplayer box with s-video you would need to modify that cable.
Information retrieved here.